Well, actually three interfacings but first we’ll discuss the two different brands of fusible hair canvas that I bought.
I know it would be helpful if I knew which brands these are but unfortunately I didn’t note that down! The top one is more grey in colour and also more expensive at $15.99 per metre. I bought that one at Dressew. The bottom piece is a lighter colour, slightly heavier in the hand (but that’s mostly due to the beads of glue on the back) and cost $12.98 per metre at Fabricana (Richmond, BC). Both types were around 20 – 22” wide, so quite narrow as fabrics go. Per square metre they are more expensive than my main fabric. Even the cheap one.
Now comes the truth! The first more-expensive one was easily and successfully fused to the coat fronts and the collar pieces. It held the roll lines really nicely when I allowed it to cool and dry into shape. Just as if I had actually spent time pad stitching the shaping in as you would for a non-fusible but way less work! I had planned to also interface the facing pieces which on this double-breasted style are quite wide and could use good support. Unfortunately I didn’t have enough of the original type of canvas so when we went out to Fabricana where I bought the weft-insertion interfacing (because Dressew didn’t have any) I picked up another metre of whatever brand of hair canvas it was that they had available there. I used the exact same fusing technique that I did on all the other interfacings but this stuff did NOT want to stick to my wool blend melton cloth. It bubbled badly and you could not only feel it but see the pimpling when I tried to fold the roll line. Didn’t hold its shape either. Grrrr….
Obviously not the same product at all! And a complete waste of my money. How can you know these things though unless you test them? It’s not like the store will sell you a tiny test square of each kind! The only upside was that it peeled off my facing pieces without damaging them. Much too easily in fact because I didn’t even need to use the iron to soften the glue. Boo. Binned. So now what? I decided to use the weft-insertion interfacing on my front facings instead.
I did manage to remember the name of this one! I also like it a lot. The 602 is the heavier version. (There’s also a lighter weight 601.) The fibre content is 78% viscose/22% polyester and this is the “black”. It’s much darker IRL but not really completely black. It fused easily with lots of steam and pressure for about 12 seconds and didn’t leave any glue on Chi-Long’s foot. The results are a thicker, non-stretchy but still flexible fabric. You can’t even see a line from the front where a partial interfacing piece ends. This is good stuff. Luckily I bought 4 metres (at $7.25 per metre if you’re keeping track) and I’m glad I did because I don’t have all that much left now. This peacoat is seriously interfaced out the wazoo. Did I mention how much I love Chi-Long, my new iron? He is so steamy!
I was also working on the front pockets. I basted and hand-stitched around to tuck in the lining so it wouldn’t show at the edges.
Hey, my nails are pretty clean compared to what they look like in gardening season! Which is coming up soon. When it stops snowing. But I digress. I also topstitched the patch pockets using the triple stitch and regular thread. I tried some heavier topstitching thread but because I couldn’t get a good colour match it just didn’t look right. I may be using it for the hand-stitched buttonholes however. Not thinking about that right now. Anyway, the pockets and the flaps are on and looking pretty good. I’ll really show you the lining as soon as I get to that point. It’s very manly. Heh.
But next? Some actually assembly perhaps?